Izdelki za posoda za tubo pvc (31)

Tub de policarbonat de 16x110 / Tub de testare cu capac file - Tub de policarbonat CODUL PRODUSULUI:019 Sterilizat:Autoclave 121 ° Resistant Materii prime:Policarbonat Numărul codului de bare:8682009086432 Număr de catalog:MK.09.432

Shapely packing container with screw cap. Emptying without residues because there are no crevices, cost-effective. Material:PP, white Sterilisable:Yes

Salbentiegel, Schraubdeckeldosen, Snap Lock- Dosen SL-Dosen - Universeller Behälter aus weißem PP, mit Aufprell- und Originalitätsverschluss aus weißem PE Schraubdosen - Schraubdosen aus weißem PE mit Schraubdeckel Salbentiegel - Kruke aus weißem PP mit weißem Schraubdeckel aus PP

Le tube laminé multicouche est un tube composé de 3 couches : PE – EVOH – PE Tube souple PE-EVOH-PE (400 microns) Impression digitale, CMJN (Cyan Magenta Jaune Noir) Aspect brillant ou mat Marquage à chaud bouchons et tubes Pourquoi choisir le tube laminé multicouche ? – Une barrière EVOH intégrée dans le corps du tube => excellente barrière a l’O2-gaz-solvants-huiles – Une soudure longitudinale invisible (une fois le tube conditionné, aspect identique à l’aspect du tube cosmétique classique) – Des décors en haute résolution 600dpi (dot per inch) – Pas de clichés offset, mais un forfait infographie plus économique – Pas de surcout offset complexe – La possibilité d’un BAT sur tube à plat en 4-5 jours – Un meilleur délai que le tube extrudé – Des minimum de fabrication (MOQ) intéressants

Recipientes de plástico claros con asa, perfecta solución de envasado para productos de consumo y al por menor Su material de elevada transparencia y su rosca de reducido perímetro proporcionan una perfecta presentación del producto Sus infinitas combinaciones de longitudes interiores permiten adaptar perfectamente el envase al producto Aplicación universal

Kunststoff-Röhrchen / Reagenzgläser aus PP (Polypropylen), in verschiedenen Volumina (4,5ml, 5ml, 10ml, 13 ml, 20ml), mit und ohne Rand, zylindrisch order konisch, mit Schraubverschluss oder ohne. Dazu passende Stopfen / Lamellenstopfen ais PE (Polyethylen) in den Durchmessern 12 mm und 16 mm.

Produktvarianten anzeigen Artikelnummer:6-0100-010-45 Bezeichnung:Kanister Breite:110,00 mm Farbe:natur Gewicht:90 gr Höhe:130,00 mm Material:HDPE Tiefe:115,00 mm UN - Zulassung:ohne UN-Zulassung Verpackungseinheit:700 Volumen:1,00 L Öffnung:45 mm

Alle Tuben und Flaschen bieten wir gerne bedruckt nach Ihren Vorgaben an, zusammen mit den passenden Verschlüssen. Auch kleine Losgrößen verbunden mit kurzen Lieferzeiten sind unsere Stärke. Die Tuben und Flaschen sind am Boden bereits verschlossen und werden direkt über die Halsöffnung befüllt. Als Dienstleister sind wir spezialisiert auf das Abfüllen von viskosen Medien. Volumen: Ovaltuben: von 8 ml bis 650 ml Inhalt Volumen: von 8 ml bis 650 ml

Plastic Pipes - Plastic Pipes

PVC ist ein nachhaltiger Kunststoff mit langer Lebensdauer. Der Klassiker für Rohrpostsysteme, heute aus bleifreiem PVC-U, besticht durch sein geringes Gewicht und leichte Handhabung. Die größte Auswahl an Abmessungen, Farben und Bogenradien liegt für Sie am Lager bereit. Abmessung::50, 60, 63, 70, 80, 90, 108, 110, 125, 132, 160, 200, 315 Länge Standard::2500mm / 5000mm Material::PVC-U (PVC hart) Farbe Standard::eisengrau, silbergrau, signalweiß, transparent, Sonderanfertigung::auf Anfrage

PER FOGNATURE E SCARICHI INTERRATI NON IN PRESSSIONE

Round plastic ventilation pipes are joined by welding (or PVC gluing up to ø250). Manufactured in accordance with DIN 8062 standards for ventilation pipes. PVC pipes of larger diameter than 500mm are made of sheets. Pipes made of PP, PPs, PE and PPELs are extruded. Other wall thicknesses are available on request.

Botellas, bidones y sus completos de cierre (tapones desgasificantes y venteo, inducción, etc) para envasar productos químicos, agroquímicos, detergencia industrial, etc. Homologados UN - ADR

IHB konfektioniert PTFE Glatt- und Wellschläuche

Kunststoff-Zylinder und -Hülsen für die Textilindustrie, hergestellt im Spritzgießverfahren

Grazie ai nostri macchinari e al nostro personale specializzato siamo in grado di garantire un'ottima finitura in tempi molto brevi. Inoltre la lavorazione del Pvc, ci permette di soddisfare le esigenze dei clienti che desiderano un materiale economico. Con la lavorazione del PVC si ottengono tolleranze molto simili ai materiali più tenaci, come il Delrin e il Nylon, +/-0,2 mm su parti fresate e H7 su parti tornite.

Diameter(cm) / Width(cm)46/60 Volume(lt)200 Height(cm)104 Top diameter(cm)54,5 CertidicatesISO9001

Pvc Column Pipes Light Series

The Tube T 29/50 TO is a plastic tube for tablets, pills or dragees with a heights of 50mm and a seal diameter of 29,3mm. Sanner offers a wide range of matching caps with desiccant and in various colors.

Split pipes made of PVC-U with H-profile For subsequent protection of cables, which have already been laid, or for repairing damaged pipe systems. - Sealed against fine sand - Reusable - No sleeve required - Extendable to any length - The joining of the split pipes does noch require any tools - A continuous pipeline is achieved by offsetting the top split pipe (no sleeves required) The joining is achieved by connecting the two split pipes. The connection battens (H-profile) are glued on one side. A continuous pipeline is achieved by offsetting the top split pipe (no sleeves required). In addition, the H-profiles can be joined to the split pipes during the final assembly using Tangit plastic glue for PVC-U. Standard design: Material: PVC-U Locking system: H-profile Colour: black Length: 3 m

Bottles, canisters, Jerricans, in PCR HDPE material Include PCR (Post Consummer Recycling) material Bi-directional barrier Possibility for UN approved packaging 100% recyclable barrier packaging

For drinking water applications

Closed (straight) and filtered (filtered) deep well pipes; one end with male head and the other end female, internal pass, more secure and provides ease of installation is produced as trapezoidal gear. Since the trapezoidal teeth on both ends of our pipes are opened at the same time at the same time, it provides speed and easy assembly during the piping of the well, and since it is fully centered, it ensures smooth graveling and pump assembly thanks to the equal space around it. Raw Material PVC-U Length: 2-3 m. and 4 m. in length Filter Slit: 2mm perpendicular to the pipe axis. Width. Thread: trapezoidal groove threaded according to TS . Connection: male and female plug-in Marking: Standard marking

Using only modern innovations and high-tech equipment, it is possible to achieve manufacturing of the highest quality products. Kharkov Himprom Ltd, the leader in the polymer packaging field, keeps up with changes over time by developing its facilities with new modern equipment. Together with European experts, we have developed a completely new line of 5, 10 and 20 liters stackable canisters that allows our customers to ensure the safety of the substance being packed, as well as keeps the environment secure during the storage and transportation of the cans. The main advantages of the new canisters range - Unique design; - Absolute impermeability; - Tampering control; - Chemical inertness; - Mechanical resistance; - Temperature resistance; - Increased resistance to warpage, cracking and fracture; - Comfortable stacking; - Environmentally friendly packaging; - UN Certification and Compliance with the State Sanitary and Epidemiological Standards. Usage:Packaging for transportation and storage of hazardous substances, food & beverages, industrial chemi Capacity (L):20,0 Color:White, Natural, other colors on request Neck Finish (mm):Ø 48,9 / Ø 54,0 Closure (mm):DIN 60 / DIN 63 Induction Heat Seal:-/+ Tamper Evident Closure:+ View stripe:+ Height (mm):408,0 Length (mm):298,0 Width (mm):240,0 the size of the label:230*170 UN-certification:On request Material:HDPE

The hose is an anti-static, heat resistant, lightweight and innovative product with reduced material that conforms to the required standards. Pending approval, Kee Connections will be able to offer CE Certification for customers to add to their own technical documents.

PER FOGNATURE E SCARICHI INTERRATI NON IN PRESSSIONE

PER INSTALLAZIONI ELETTRICHE E TELECOMUNICAZIONI CONFORME ALLA NORMA CEI EN 6138624 E AI REQUISITI ESSENZIALI DELLA DIRETTIVA B.T. 2006/95/CE OUTER:NERO INNER:NERO

Produktvarianten anzeigen Artikelnummer:6-0200-050-51 Bezeichnung:Kanister Breite:145,00 mm Gewicht:195 gr Höhe:248,00 mm Material:HDPE Paletteneinheit:256 Tiefe:192,00 mm UN - Zulassung:UN-Y Zulassung Verpackungseinheit:16 Volumen:5,00 L Öffnung:51 mm

RISPONDENTE ALLE PRESCRIZIONI DEL DECRETO N° 174 DEL 06/04/04 (GU N°166 del 17/07/04) DEL MINISTERO DELLA SALUTE, SPECIFICHE TECNICHE E PROVE DI COLLAUDO INTERNE SECONDO PROCEDURA S.Q. N° MLAB030 IN ACCORDANCE WITH THE PRESCRIPTIONS OF THE DECREE N° 174 DATED 06/04/04 (OFFICIAL GAZETTE N° 166 OF 17/07/04) OF THE MINISTRY OF HEALTH. TECHNICAL SPECIFICATIONS AND INTERNAL TESTINGS ACCORDING TO THE PROCEDURE S.Q. N° MLAB030 REPONDANT AUX PRESCRITIONS DU DECRET N° 174 DU 06/04/04 (BO N° 166 DU 17/07/04) DU MINISTERE DE LA SANTE, CAHIER DES CHARGES TECHNIQUES ET ESSAIS SELON LES PROCEDURES S.Q. N° MLAB030.

Dieser „Dreiteiler“ ist in allen Abmessungen von 60 bis 315 mm erhältlich. Das PVC Fahrrohr ihrer Wunschgröße ist eingebettet in einem PU-Schaummantel und wird zusätzlich von einem starken PEHD Wellrohr geschützt. Das PVC Erdrohr ist auch mit glattem Außenrohr erhältlich. Abmessung::60 bis 315 mm Länge: :5000 mm Material::PVC-U (PVC hart) Farbe::grau/ schwarz Sonderanfertigung::auf Anfrage